| Item # |
Description |
Price |
57
 |
Gibson
mini humbucker mounting ring, cream, early 70's. It has a glob of
ancient epoxy around the bottom of one of the mounting screw holes and
a little around the top of the same hole. No cracks but it looks
like a screw might have been pulled through the hole, then this epoxy
repair made. The repair is cosmetically noticeable up close but
appears to be structurally stable. Very good condition with a
cool aged patina! |
$25.00 |
127
 |
Gibson
Les Paul stop tailpiece, gold, 70's, some surface scratches but the
plating is all intact, heavy, excellent, |
$25.00
|
10
 |
Gibson
Kluson Deluxe strip tuners as on 50's Juniors, nickel, single line,
excellent++, just a few spots of oxidation, all buttons clean, shafts
are straight, these tuners are tight, it doesn't get any better
than this, no screws or bushings |
$150.00
|
52
 |
DiMarzio
1/4" black humbucker ring, 80's NOS
|
$5.00
|
145
 |
DiMarzio
1/4" black humbucker surround, late 70's or early 80's, used, excellent |
$5.00
|
5
 |
Gibson
Kluson Deluxe strip tuners as on 50's Juniors, nickel, single line,
excellent. A little more oxidation than #10, but still excellent
overall, buttons clean and smooth with a nice patina, no screws or
bushings |
$100.00
|
41
 |
Gibson
Les Paul Junior pickguard from original 58-60 double cutaway model,
1/8" thick black plastic, original and perfect in excellent + condition |
$450.00 |
903
 |
Interesting
pair of hand carved Gibson style humbucker rings. I took these
off a Les Paul some 20+ years ago, they look like oak and even have a
slight curve carved into the bottom of them. Unique! |
$10.00 |
211
 |
late
70's original Gibson archtop tuneamatic base, rosewood, NOS |
$25.00 |
95
|
set of
six original matching gold plated PAF polepiece screws, the plating is
intact, these are really clean, excellent++ |
$50.00 |
116
|
perfect
late 50's original nickel Gibson stop tailpiece, near
mint with just the vaguest shadow of a top wrap long ago. The
tailpiece weighs 1.1 oz. Throat
depth slightly thicker on one side (0.288" and 0.270"). Measure
your studs carefully. String holes and countersinks drilled very
close to the lower edge on this tailpice, see pictures. Excellent
original condition |
$1750.00
|
802
|
A single
nickel plated original Gibson stop tailpiece stud, 9/32" ear spacing.
The actual stud length is 7/8". This appears to be an
original 1" stud that was cut down to 7/8" for some reason.
Beautiful condition with near mint nickel plating. |
$50.00 |
779
 |
an IRC
500k pot. I have read that these were used in Gibson guitars, but
I can't really remember where I got this or what it may have been
installed in. The source material I have indicates IRC had a
different dating scheme than other pots and according to what I have,
this pot would be from 1961. The markings on the plastic part say
IRC, made in USA and the stamped markings on the side of the pot are
CTS 615 7604 500k A 6105
Does the A mean audio taper? Please email or call if you have
better info on this pot. |
$35.00 |
809
 |
one
complete set of 4 brass bobbin screws from an original PAF pickup,
perfect |
$35.00 |
153
 |
a
stash of 70's excellent quality braided shielding single conductor,
0.105" OD. This wire is great for any project requiring braided
wire. It is close to, but is not the wire that Gibson used.
The braided shielding is tighter and the insulation is plastic
coated white cloth. I would not recommend this wire for any
vintage restoration, but it is the functional equivalent of the wire
Stew Mac sells, except this looks more authentic without the black
plastic over the braid. I have about 20 ft and I'll sell it for
the same price as Stew Mac, per foot |
$0.60 |
805
 |
a
star
washer and a guitar output jack nut from some old guitar, I can't
remember which one but if you have an old guitar and want an old washer
and nut, this will be perfect |
$10.00 |
812
 |
From
some long forgotten humbucker pickup surgeries come these remnants:
one 5.5" and one 3" length of PAF pigtail with the correct paper
tape, as well as one 11" length of later shiny black plasticized tape.
I don't recall anything about these, I just found them in a film
canister going through stuff here. |
$15.00 |
44
 |
a
clean and perfect pair of black M69's.
Please
refer to the Les Paul Forum for a detailed analysis of what to look for
on these surrounds. Excellent original condition. HOLD 12/18/09 |
$150.00 |
818
 |
early
80's NOS Gibson nickel round head Phillips, 1/2" long. I think I
ordered these because they were slightly stronger than the flimsy ones
supplied with the Schaller tuning keys I used to install. Maybe
they are stronger, but I wouldn't really tighten them down, just to be
safe. 14 available, price each |
$0.50 |
816
 |
NOS
early 80's Gibson nickel humbucker polepiece screws. These look
good and are dimensionally correct. Bear in mind the beveled top
does not look anything like a PAF polepiece screw. Original
Gibson part # is 24-70268 (on the original parts envelope, the only
reason I know this trivia!)
13 available, price each |
$3.50 |
835
 |
original
Gibson 50's nickel tune-a-matic bridge saddle. This is the early
"chisel blade" version, that is there is no flat area on top of the
saddle. Of course 50's guitars had big flatwound strings, so this
one has a big groove in the saddle. Otherwise there is very
little wear on this item and the plating is excellent. |
$25.00 |
856
 |
Tuner
bushings used on some 60's Gibson guitars, chrome. Excellent
condition, 3 available. Price each |
$10.00 |
842
 |
one
complete set of 6 Gibson tuner bushings, nickel. They made quite
a few versions of these but this set has 1/4" diameter shaft holes,
bushings are 5/16" tall |
$25.00 |
844
 |
another
set of 6 nickel tuner bushings, similar to 842 but slightly cleaner,
these are from back when everybody wanted Grovers and Schaller tuners! |
$45.00 |
850
 |
original
Gibson chrome humbucker bobbin screws, NOS from the late 70's, early
80's, 2 sets of 4 available available, price per set |
$10.00 |
832
 |
a
stash of NOS Gibson trussrod nuts from 1980 or so, price each |
$5.00 |
836
 |
NOS
Gibson early 80's nickel TOM saddles, blade style with narrow ledge,
one of them has slightly rounder corners, price each |
$10.00 |
849
 |
aftermarket
gold anodized aluminum Les Paul jackplates, NOS from back in the early
80's, price each |
$3.00 |
853
 |
I put
these under Gibson, but could just as well be under Fender. Some
old jack nuts I took off of old guitars at one time or another for who
knows what reason. Funky and original, take your pick of 3
available. Price each |
$5.00 |
840
 |
funky
original Gibson bevel top TOM adjustment wheel, the gold is losing its
luster but if you need one for a Bigsby guitar, here it is, 70's, very
good |
$5.00 |
830
 |
Gibson
nickel tune-a-matic saddle screws, nickel, bevel head wire version,
excellent original condition, price each |
$5.00 |
839
 |
Does
anybody know what tune-a-matic version these saddles belong to?
Please email me. Early 80's (?) nickel, price each |
|
831
|
Gibson
early 80's replacement pearloid fingerboard dots, 1/4" diameter, 5/64"
thick, NOS, price each |
$0.50 |
822
 |
set of
6 gold Gibson TOM saddle screws, late 70's , early 80's, excellent |
$20.00 |
820
 |
Gibson
gold TOM saddles, late 70's or early 80's, plating excellent, 2
available, price each |
$5.00 |
858
 |
The
mint Grover gold washers and screws are here because nobody puts
Grovers on Fenders. I don't know where these came from but if you
want to spruce up a guitar here they are, late 70's early 80's,
excellent |
$5.00 |
838
 |
NOS
Gibson chrome tune-a-matic height adjustment wheels, early 80's NOS,
price per pair |
$5.00 |
167
 |
An
absolutely pristine set of four matched 50's Gibson tophat knobs, nice
amber patina, as close to mint as possible, it just doesn't get any
better than this! Excellent original near mint condition. |
$325.00 |
117
|
Original
Gibson 50's light stop tailpiece, nickel, pristine near mint
example.
This has been in the vault for a long time, I don't think you can
find a better one. It weighs 1 oz.
Throat depth is 0.260 on both sides, just a hair over 1/4", if
you want to make sure your vintage studs fit. |
$2750.00 |
863
 |
original
Gibson 50's toggle switch tips as found on many Gibson models,
price each |
$250.00 |
191
 |
matching
pair of 50's/ early 60's Gibson nickel stop tailpiece studs, full 1"
threaded shank. 0.290" throat depth. On one of the tops of
this pair the slot is cut off slightly off-center, interesting anomaly,
see pictures. Excellent original condition |
$250.00 |
